- ページ 6

スピーカーシステム Bose Videobar VB1のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Bose Videobar VB1 47 ページ。 Display mounting kit
Bose Videobar VB1 にも：クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ), よくある質問 (8 ページ), 重要安全取扱説明書 (17 ページ), クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ)

ページを印刷する

Product Power State Table

The product, in accordance with the Ecodesign Requirements for Energy Related Products Directive 2009/125/EC, is

in compliance with the following norm(s) or document(s): Regulation (EC) No. 1275/2008, as amended by Regulation

(EU) No. 801/2013.

Required Power State Information

Power consumption in specified power

mode, at 230 V/50 Hz input

Time after which equipment is automatically

switched into mode

Power consumption in networked standby

if all wired network ports are connected and

all wireless network ports are activated, at

230 V/50 Hz input

Network port deactivation/activation

procedures. Deactivating all networks will

enable standby mode.

External Power Supply Technical Information

The external power supply provided with the product, in accordance with the Ecodesign Requirements for Energy

Related Products Directive 2009/125/EC, is in compliance with the following norms(s) or documents(s): Commission

Regulation (EU) 2019/1782.

Manufacturer

Commercial registration number

Address

Model identifier

Input voltage

Input AC frequency

Output voltage

Output current

Output power

Average active efficiency

Efficiency at low load (10%)

No-load power consumption

REG U LATORY I N FO R MAT IO N

< 2.5 hours

Wi-Fi: Deactivate by restoring the factory default settings: Press

and hold the Home and Autoframe buttons on the remote control

simultaneously for 5 seconds, or press and hold the Mute and

Bluetooth buttons on the side of the unit simultaneously for

5 seconds. Activate via Bose Work application.

Ethernet: Deactivate by removing the Ethernet cable. Activate by

inserting the Ethernet cable.

Bluetooth : Deactivate by restoring the factory default settings:

Press and hold the Home and Autoframe buttons on the remote

control simultaneously for 5 seconds, or press and hold the Mute

and Bluetooth buttons on the side of the unit simultaneously for

5 seconds. Activate by pairing with a Bluetooth source.

Bose Products B.V.

36037901

Gorslaan 60

1441 RG Purmerend

The Netherlands

DT24V-1.8C-DC

100 V–240 V

50 Hz/60 Hz

24 VDC

1.9 A

45 W

89.9%

87.0%

0.07 W

Power Modes

Standby

Wi-Fi, Ethernet, Bluetooth < 2.0 W

< 0.5 W

< 2.0 W

E N

Networked Standby

< 20 minutes

< 2.0 W