Bose Videobar VB1 Руководство - Страница 6

Просмотреть онлайн или скачать pdf Руководство для Акустическая система Bose Videobar VB1. Bose Videobar VB1 47 страниц. Display mounting kit
Также для Bose Videobar VB1: Краткое руководство по эксплуатации (2 страниц), Краткое руководство по эксплуатации (2 страниц), Вопросы и ответы (8 страниц), Важные инструкции по безопасности Руководство (17 страниц), Краткое руководство по эксплуатации (2 страниц), Краткое руководство по эксплуатации (2 страниц)

Bose Videobar VB1 Руководство
Product Power State Table
The product, in accordance with the Ecodesign Requirements for Energy Related Products Directive 2009/125/EC, is
in compliance with the following norm(s) or document(s): Regulation (EC) No. 1275/2008, as amended by Regulation
(EU) No. 801/2013.
Required Power State Information
Power consumption in specified power
mode, at 230 V/50 Hz input
Time after which equipment is automatically
switched into mode
Power consumption in networked standby
if all wired network ports are connected and
all wireless network ports are activated, at
230 V/50 Hz input
Network port deactivation/activation
procedures. Deactivating all networks will
enable standby mode.
External Power Supply Technical Information
The external power supply provided with the product, in accordance with the Ecodesign Requirements for Energy
Related Products Directive 2009/125/EC, is in compliance with the following norms(s) or documents(s): Commission
Regulation (EU) 2019/1782.
Manufacturer
Commercial registration number
Address
Model identifier
Input voltage
Input AC frequency
Output voltage
Output current
Output power
Average active efficiency
Efficiency at low load (10%)
No-load power consumption
REG U LATORY I N FO R MAT IO N
< 2.5 hours
Wi-Fi: Deactivate by restoring the factory default settings: Press
and hold the Home and Autoframe buttons on the remote control
simultaneously for 5 seconds, or press and hold the Mute and
Bluetooth buttons on the side of the unit simultaneously for
5 seconds. Activate via Bose Work application.
Ethernet: Deactivate by removing the Ethernet cable. Activate by
inserting the Ethernet cable.
Bluetooth : Deactivate by restoring the factory default settings:
Press and hold the Home and Autoframe buttons on the remote
control simultaneously for 5 seconds, or press and hold the Mute
and Bluetooth buttons on the side of the unit simultaneously for
5 seconds. Activate by pairing with a Bluetooth source.
Bose Products B.V.
36037901
Gorslaan 60
1441 RG Purmerend
The Netherlands
DT24V-1.8C-DC
100 V–240 V
50 Hz/60 Hz
24 VDC
1.9 A
45 W
89.9%
87.0%
0.07 W
  |  
6
Power Modes
Standby
Wi-Fi, Ethernet, Bluetooth < 2.0 W
< 0.5 W
< 2.0 W
E N
Networked Standby
< 20 minutes
< 2.0 W