- ページ 33

ホームシアターシステム Bose SoundTouch 220のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Bose SoundTouch 220 40 ページ。 Series ii
Bose SoundTouch 220 にも：オーナーズマニュアル (22 ページ), クイック・スタート・マニュアル (2 ページ)

ページを印刷する

Problem

Remote control

is inconsistent or

does not work

System does not

sync with the

correct source /

selects the incor-

rect source after

delay (CEC)

CEC

inconsistent or

does not work

Poor or distorted

sound

Intermittent sound

What to do

• Match the + and – symbols on the batteries with the + and – mark-

ings inside the compartment (see page 17).

• Replace the battery (see page 17).

• Press the volume button on the remote control and see if the correct

source button flashes.

• Remove the protective film from the console.

• If using CEC:

- Point the remote control at the console.

- Use the Alternate On setting (see page 30).

- Disable CEC on your system (see page 30) and program the

remote to control your source (see page 22).

• If you have programmed the remote to control your source:

- Point the remote control at the appropriate source.

- Ensure you have entered the correct code for your source's brand.

- Program the remote with another code (see page 22).

• Use the Alternate On setting (see page 30).

• Disable CEC on your source (refer to your source owner's guide for

more information).

• Disable CEC on your system (see page 30) and program the

remote to control your source (see page 22).

• Use the Alternate On setting (see page 30).

• Disable CEC on your source (refer to your source owner's guide for

more information).

• Disable CEC on your system (see page 30) and program the

remote control (see page 24).

• Remove all protective films from the system.

• Secure all cable connections on the soundbar, TV, and connected

sources.

• If you see the error message Cannot find Acoustimass:

- Plug in the Acoustimass

- Pair the Acoustimass module with the console (see page 35).

• If using the analog or

source.

• Factory reset the system (see page 35) and run the ADAPTiQ

audio calibration (see page 19).

• Secure all cable connections on the soundbar, TV, and connected

sources.

• Move system away from potential interference, such as a wireless

router, cordless phone, television, microwave, etc.

• Toggle CEC between Alternate On and Default On (see page 30).

Care and Maintenance

module.

connector, decrease the volume on your

English - 33