Bose SoundTouch 220 Kullanıcı El Kitabı - Sayfa 33

Ev Sinema Sistemi Bose SoundTouch 220 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Bose SoundTouch 220 40 sayfaları. Series ii
Ayrıca Bose SoundTouch 220 için: Kullanıcı El Kitabı (22 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar)

Sayfayı Yazdır

Problem

Remote control

is inconsistent or

does not work

System does not

sync with the

correct source /

selects the incor-

rect source after

delay (CEC)

CEC

inconsistent or

does not work

Poor or distorted

sound

Intermittent sound

What to do

• Match the + and – symbols on the batteries with the + and – mark-

ings inside the compartment (see page 17).

• Replace the battery (see page 17).

• Press the volume button on the remote control and see if the correct

source button flashes.

• Remove the protective film from the console.

• If using CEC:

- Point the remote control at the console.

- Use the Alternate On setting (see page 30).

- Disable CEC on your system (see page 30) and program the

remote to control your source (see page 22).

• If you have programmed the remote to control your source:

- Point the remote control at the appropriate source.

- Ensure you have entered the correct code for your source's brand.

- Program the remote with another code (see page 22).

• Use the Alternate On setting (see page 30).

• Disable CEC on your source (refer to your source owner's guide for

more information).

• Disable CEC on your system (see page 30) and program the

remote to control your source (see page 22).

• Use the Alternate On setting (see page 30).

• Disable CEC on your source (refer to your source owner's guide for

more information).

• Disable CEC on your system (see page 30) and program the

remote control (see page 24).

• Remove all protective films from the system.

• Secure all cable connections on the soundbar, TV, and connected

sources.

• If you see the error message Cannot find Acoustimass:

- Plug in the Acoustimass

- Pair the Acoustimass module with the console (see page 35).

• If using the analog or

source.

• Factory reset the system (see page 35) and run the ADAPTiQ

audio calibration (see page 19).

• Secure all cable connections on the soundbar, TV, and connected

sources.

• Move system away from potential interference, such as a wireless

router, cordless phone, television, microwave, etc.

• Toggle CEC between Alternate On and Default On (see page 30).

Care and Maintenance

module.

connector, decrease the volume on your

English - 33