Bose SoundTouch 220 Kullanıcı El Kitabı - Sayfa 32
Ev Sinema Sistemi Bose SoundTouch 220 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Bose SoundTouch 220 40 sayfaları. Series ii
Ayrıca Bose SoundTouch 220 için: Kullanıcı El Kitabı (22 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar)
Sayfayı Yazdır
Care and Maintenance
Troubleshooting
Problem
No power
No sound
Sound is coming
from your TV
speakers
No or poor video
32 - English
What to do
• Secure the Acoustimass
power cords.
• Reconnect the Acoustimass module's, soundbar's and console's
power cords firmly into an AC (mains) outlet.
• Use the remote control to power on the system.
• Unmute the system.
• Increase the volume.
• Plug the Acoustimass module, soundbar and console into a live AC
(mains) outlet.
• Insert the speaker cable into the Speaker Connections connector,
not the Bose
Link connector.
®
• Insert the HDMI
™
or Audio Return Channel. If your TV does not have an HDMI ARC
connector, use a secondary audio cable in addition to the HDMI
cable (see page 15).
• If using a secondary audio cable, insert the cable into a connector
on your TV labeled Output or OUT, not Input or IN.
• Secure all cable connections on the soundbar, TV and connected
sources.
• If your source is connected to your TV, select the correct TV input
(see page 24).
• Toggle CEC between Alternate On and Default On (see page 30).
• Disconnect headphones when not in use.
• If connecting your source through the
using the System menu (see page 30).
• If you are connecting headphones to the
Headphones using the System menu (see page 30).
• If you see the error message Cannot find Acoustimass, pair the
Acoustimass module with the console (see page 35).
• Reset the system (see page 35).
• Insert the HDMI cable into a connector on your TV labeled ARC or
Audio Return Channel (if available).
• Turn off your TV speakers (refer to your TV owner's guide).
• Decrease your TV volume to its lowest setting.
• Switch to a different source, then return to the affected source to try
and re-establish a signal.
• Disconnect and reconnect the HDMI cable of the affected source.
• Disconnect and reconnect the HDMI cable from the console to the
TV.
• Power off and on the affected source, TV and the console.
• If you assigned the optical, analog, or coaxial digital connector to
one of your HDMI
ing the system menu. See page 30.
module's, soundbar's and console's
®
cable into a connector on your TV labeled ARC
sources, change it back to Auto/TV (Default) us-
™
connector, enable Audio in
connector, enable