- ページ 5

ステレオシステム Bose 321 GSX Series IIIのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Bose 321 GSX Series III 48 ページ。 Intelligent playback system
Bose 321 GSX Series III にも： オーナーズマニュアル (44 ページ), クイック・セットアップ・マニュアル (2 ページ), マニュアル (29 ページ)

ページを印刷する
Bose 321 GSX Series III オーナーズマニュアル
Step
2
Step
2

To control the TV

1. Turn on both the 3•2•1 system and your TV.
2. Press and hold the Program and TV On/Off
buttons (shown on the left) for 3 seconds.
The remote Source buttons will light to
signal that you have entered programming
mode.
3. Use the number keys to enter your TV's
four-digit setup code.
4. Press Program once to complete program-
ming. The remote will flash once to indicate
successful programming. To confirm that,
use the remote to turn your TV on and off or
change channels.
Note: If your advanced remote flashes rapidly
several times during programming, an error has
occurred. Wait 7 seconds for the remote to clear
and begin programming again.

To control the cable/satellite box

1. Turn on both the 3•2•1 system and your
cable/satellite box.
2. Press and hold the Program and Guide
buttons (shown on the left) for 3 seconds.
The remote source buttons will light to
signal that you have entered programming
mode.
3. Use the number keys to enter your cable/
satellite box's four-digit setup code.
4. Press Program once to complete program-
ming. The remote will flash once to indicate
successful programming. To confirm that,
use the remote to change cable/satellite
channels.
Note: If your advanced remote flashes rapidly
several times during programming, an error has
occurred. Wait 7 seconds for the remote to clear
and begin programming again.
AM272394_00_pdf • October, 2003
Preparing for Use
5