- ページ 7

アンプ Bose FreeSpace E4 Series IIのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Bose FreeSpace E4 Series II 16 ページ。 Business music system
Bose FreeSpace E4 Series II にも：オーナーズマニュアル (18 ページ), クイック・スタートアップ・マニュアル (4 ページ), オーナーズマニュアル (15 ページ), オーナーズマニュアル (33 ページ)

4.5 Rack mounting the E4 unit

Required accessory: FreeSpace

(PC029858)

Rack ears

The E4 unit requires three 1.75" (4.4 cm) rack space units with a

16" (40.6 cm) inside depth (including the rear supports). When

mounting, use four screws with washers to prevent marring the

front panel. Neoprene rubber washers are a good choice

because they grip the screw head and prevent the screws from

backing out from vibration or during transportation.

Installer's Note: If the E4 unit is to be transported while

mounted in a rack, be advised that the rear of the E4 unit

must be mechanically supported. Install a shelf under the unit

or use brackets in such a way as to support the rear of the

unit. Failure to use proper mounting hardware may result in

damage to the E4 unit during transport.

4.0 Hardware Installation

E4 System Rack Mount Kit

(8) #8-32 x 1/2 in

Attaching rack ears to the E4 chassis

Attaching the E4 chassis to the rack

(mounting screws not provided)

26 of 80