- ページ 14

ヘッドセット Bose A20 AviationのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Bose A20 Aviation 44 ページ。 Aviation headset
Bose A20 Aviation にも：クイック・リファレンス・マニュアル (2 ページ), オーナーズマニュアル (44 ページ), オーナーズマニュアル (43 ページ), オーナーズマニュアル (40 ページ), オーナーズマニュアル (44 ページ), クイック・リファレンス・マニュアル (2 ページ)

Preparing the Headset for Use

To disconnect the headset

Pull back on the sleeve near the end of the 6-pin plug.

Gently continue pulling back to remove the plug from the connector.

Caution: Do not pull the connector out without first pulling back the sleeve.

Forcing the connector out will damage the cable and/or the aircraft

instrument panel.

Pull sleeve back, then pull plug out

Using the dual general aviation plugs

The most common battery powered (only) version of the headset has two general

aviation (G/A) plugs that connect to the aircraft audio. Although the plugs look

similar, the microphone plug is shorter, thinner, and has a slightly different shape

than the intercom plug.

Insert the thicker intercom plug in first. It will only fit into one of the jacks.

Then insert the thinner microphone plug into the other jack.

The headset is also available with other types of plugs for connecting to various

aircraft audio jacks. These single-plug connectors should be inserted into the ap-

propriate jack on your aircraft control panel. Refer to "Power and cable variations"

on page 9.

14 - English

Sleeve

Microphone

Intercom/Audio