- ページ 23

ヘッドセット Bose A20 AviationのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Bose A20 Aviation 44 ページ。 Aviation headset
Bose A20 Aviation にも：クイック・リファレンス・マニュアル (2 ページ), オーナーズマニュアル (44 ページ), オーナーズマニュアル (43 ページ), オーナーズマニュアル (40 ページ), オーナーズマニュアル (44 ページ), クイック・リファレンス・マニュアル (2 ページ)

Reconnecting to a previously connected device

Each time you turn on the Bluetooth feature, the headset will attempt to reconnect

with the two most recently connected Bluetooth

Turn the headset on.

Make sure the Bluetooth indicator is flashing blue. If not, press

The indicator flashes blue.

To confirm connection, check the Bluetooth device list on your device.

If a connected Bluetooth device moves out of range, the connection will be lost.

The headset will automatically attempt to reconnect.

If the headset is unable to reconnect, it will go back into pairing mode. After five

minutes of inactivity, the Bluetooth feature will turn off. Move the device back into

range, and press

• On the headset, press and hold

off.

• On your device, turn the Bluetooth feature off.

• Move the Secondary Audio Mode selector to the OFF position.

With the Bluetooth feature on (Bluetooth indicator flashing), press and

hold

and

pairing mode.

Use the Bluetooth volume controls on the right side of the control module to

control the volume of a connected Bluetooth device.

Volume

down

• Each press increases or decreases the volume by one level.

• Press and hold the volume button to change the volume continuously.

once to reconnect.

at the same time for seven seconds. The headset will return to

devices.

for 5 seconds to turn the Bluetooth feature

Using the Headset

English - 23