- ページ 27

ヘッドセット Bose A20 AviationのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Bose A20 Aviation 44 ページ。 Aviation headset
Bose A20 Aviation にも：クイック・リファレンス・マニュアル (2 ページ), オーナーズマニュアル (44 ページ), オーナーズマニュアル (43 ページ), オーナーズマニュアル (40 ページ), オーナーズマニュアル (44 ページ), クイック・リファレンス・マニュアル (2 ページ)

Microphone windscreen

Remove the windscreen from the microphone as described in "Microphone

windscreen replacement" below.

Rinse and air dry the windscreen. Make sure the windscreen is completely dry, then

reattach.

Do not attempt to remove, replace, repair, or clean this component. Located inside

the earcup, the inner screen is critical to proper headset operation. If the screen

appears to be damaged or worn out, contact Bose.

If the inner screen becomes damp from environmental moisture such as light rain,

dew, perspiration, or condensation, allow it to air dry only. Do not use electric

heaters, blowers, or hair dryers to dry the inner screen.

Remove the cushion as described in "Headband cushion replacement" on

page 29.

Place the cushion in a solution of water and a mild detergent.

Allow the cushion to air dry, then reattach.

Through normal use, parts like windscreens and ear cushions may require periodic

replacement. Replacement parts can be ordered directly from Bose Corporation.

Please refer to "Contact information" on page 41.

Gently slide or roll the windscreen off the microphone.

Slide the replacement windscreen on and make sure it fits completely over the

microphone.

Headset Care and Maintenance

English - 27