- ページ 8

ヘッドセット Bose Aviation Headset Series IIのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Bose Aviation Headset Series II 28 ページ。 Bose owner's guide aviation headset ii

ページを印刷する

Bose Aviation Headset Series II オーナーズマニュアル

Using the Bose

Figure 2

Inserting the headset

interconnect plug into

the keyway

Figure 3

Pulling back on the

sleeve to remove the

interconnect plug

Figure 4

Placing the microphone

Aviation Headset

Interconnect plug

The headset interconnect plug connects the headset cable to a power

source. The power source can be an installed connector in the aircraft's

control panel or an adapter cable connected to a portable battery pack.

The interconnect plug is designed for quick connection and removal. To

ensure correct pin alignment, the plug has a keyway.

Note: The illustrations below show the insertion of the headset inter-

connect plug into the adapter cable. To insert the interconnect plug into

the aircraft control panel, the same procedure would be used.

To insert: rotate the plug until the keyway is aligned; then insert until it

locks in place.

To remove: gently pull back on the sleeve of the connector. This

automatically unlocks the plug from the socket.

Microphone placement

For good communication clarity and noise rejection, locate the micro-

phone housing so that it just brushes your lips.