- ページ 22

ヘッドセット Bose Lifestyle 35 Series IIのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Bose Lifestyle 35 Series II 46 ページ。 Noise cancelling
Bose Lifestyle 35 Series II にも：インストレーション・マニュアル (42 ページ), インストレーション・マニュアル (36 ページ), オーナーズマニュアル (25 ページ), オーナーズマニュアル (24 ページ), オーナーズマニュアル (13 ページ), クイック・セットアップ・マニュアル (3 ページ), オーナーズマニュアル (36 ページ), オーナーズマニュアル (32 ページ), クイック・スタート・マニュアル (2 ページ), ファクトリーリセット (2 ページ), クイック・スタート・マニュアル (2 ページ), オーナーズマニュアル (38 ページ)

ページを印刷する

ONTROLLING

XTERNAL

OURCES

8. Notice the

TV Power Status

•

means the installed TV sensor is working.

TV Detected

•

means the TV sensor (if installed) is not positioned properly, or a

TV Not Detected

SCART connector is installed.

• Press System or Exit to leave the System menu.

Note: For information on positioning and using the TV sensor, refer to "Installing the TV on/off

detector" in your Installation Guide.

For cable/satellite control

While you can set the LIFESTYLE

designate one or the other, not both, in the steps below.

The device that is connected to the CBL-SAT input on your media center is the one you

should designate. So when you press the CBL-SAT source button and the On/Off button below it,

you are operating that device.

For the second device, use the AUX option to designate the device brand and code. Do so,

however, only if one or the other of the following is true:

• The device you identify is connected to the media center AUX for Audio In jacks.

• The device you identify is connected to the TV and no device is connected to the media

center AUX for Audio In jacks.

Note: For general guidelines on using the LIFESTYLE

Menus" on page 25.

Follow the cable or satellite process below:

Turn on the cable or satellite box, whichever you are setting the remote to control. Turn on

the TV and be sure to select the Video input on the TV for the media center. Then, using the

LIFESTYLE

remote control, press CBL-SAT and follow the steps below:

1. Identify the device:

• From the Remote Control options in the System menu, select

• Move right and select either

2. Identify the brand:

• In the menu options on the left, select

• Move to the right and up or down in the alphabetical list to locate your brand.

• Press Enter to select the brand.

3. Choose the device code:

• From the menu options on the left, select

• Move right to select the first code.

• Press the CBL/SAT On/Off button on your LIFESTYLE

If the cable or satellite box turns off and on, you have chosen the right code.

If not, select another code, and press the CBL/SAT On/Off button two more times.

• When you have chosen the right code, press Enter.

• Press System or Exit to leave the System menu.

Français

remote to control both cable and satellite boxes, you must

System menu, refer to "Using System

by pressing Enter.

Cable

Satellite

CBL/SAT Brand

CBL/SAT Device Code

remote. Press the button again.

Español

English

CBL/SAT Device