C
E
S
ONTROLLING
XTERNAL
22
OURCES
8. Notice the
TV Power Status
•
means the installed TV sensor is working.
TV Detected
•
means the TV sensor (if installed) is not positioned properly, or a
TV Not Detected
SCART connector is installed.
• Press System or Exit to leave the System menu.
Note: For information on positioning and using the TV sensor, refer to "Installing the TV on/off
detector" in your Installation Guide.
For cable/satellite control
While you can set the LIFESTYLE
designate one or the other, not both, in the steps below.
The device that is connected to the CBL-SAT input on your media center is the one you
should designate. So when you press the CBL-SAT source button and the On/Off button below it,
you are operating that device.
For the second device, use the AUX option to designate the device brand and code. Do so,
however, only if one or the other of the following is true:
• The device you identify is connected to the media center AUX for Audio In jacks.
• The device you identify is connected to the TV and no device is connected to the media
center AUX for Audio In jacks.
Note: For general guidelines on using the LIFESTYLE
Menus" on page 25.
Follow the cable or satellite process below:
Turn on the cable or satellite box, whichever you are setting the remote to control. Turn on
the TV and be sure to select the Video input on the TV for the media center. Then, using the
LIFESTYLE
®
remote control, press CBL-SAT and follow the steps below:
1. Identify the device:
• From the Remote Control options in the System menu, select
• Move right and select either
2. Identify the brand:
• In the menu options on the left, select
• Move to the right and up or down in the alphabetical list to locate your brand.
• Press Enter to select the brand.
3. Choose the device code:
• From the menu options on the left, select
• Move right to select the first code.
• Press the CBL/SAT On/Off button on your LIFESTYLE
If the cable or satellite box turns off and on, you have chosen the right code.
If not, select another code, and press the CBL/SAT On/Off button two more times.
• When you have chosen the right code, press Enter.
• Press System or Exit to leave the System menu.
Français
:
®
remote to control both cable and satellite boxes, you must
®
System menu, refer to "Using System
or
by pressing Enter.
Cable
Satellite
CBL/SAT Brand
CBL/SAT Device Code
®
remote. Press the button again.
Español
English
.
CBL/SAT Device
.
.
Print Page