- ページ 14

室内装飾品 DROMEAS Alma HTのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。DROMEAS Alma HT 17 ページ。 Working desk
DROMEAS Alma HT にも：取扱説明書 (12 ページ)

3.5.3 Reset procedure

When replacing the control unit or when the desktop only goes down when the arrow keys

are being pressed, the Reset procedure must be started:

1. Press and hold the "down" arrow on the joystick until the desk reaches the lower height

2. Then release the key

3. Press and hold the down arrow key (long) until the surface is moving

4. Release the "down" key. The desk is ready for use!

The Alma HT/HC desk is equipped with a modern collision detection system. Thanks to

the advanced protection system, even the smallest office disturbance is recorded when up

and down. As a result, the movement of the surface is interrupted immediately after a

hurdle strikes and you drive immediately in the opposite direction. This ensures reliable

collision detection and maximum safety when moving the desktop.

WARNING: Risk of injury and damage!

Although the collision tracking system reliably detects even very small unusual

movements of the desk surface, it cannot be 100% guaranteed to avoid injuries to

office users or nearby people. As a result, no liability for body injury or other damages

is assumed! Users are responsible for avoiding injury and other damage during office

operations.

When using the working desk for the first time, you may notice oil traces in lifting units.

Please wipe with a dry or slightly damp cloth. Commercial detergents available to clean

the office surfaces can be used. Only use care and cleaning products that are suitable for

the respective materials (wood, plastic, metal). The use of chemical or biological cleansers

is not required. The electric height adjustment mechanism of the desk does not require