DROMEAS Alma HT Gebruiksaanwijzing - Pagina 14
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} DROMEAS Alma HT. DROMEAS Alma HT 17 pagina's. Working desk
Ook voor DROMEAS Alma HT: Gebruiksaanwijzing (12 pagina's)
Pagina afdrukken3.5.3 Reset procedure
When replacing the control unit or when the desktop only goes down when the arrow keys
are being pressed, the Reset procedure must be started:
1. Press and hold the "down" arrow on the joystick until the desk reaches the lower height
2. Then release the key
3. Press and hold the down arrow key (long) until the surface is moving
4. Release the "down" key. The desk is ready for use!
3.6 Collision tracking
The Alma HT/HC desk is equipped with a modern collision detection system. Thanks to
the advanced protection system, even the smallest office disturbance is recorded when up
and down. As a result, the movement of the surface is interrupted immediately after a
hurdle strikes and you drive immediately in the opposite direction. This ensures reliable
collision detection and maximum safety when moving the desktop.
WARNING: Risk of injury and damage!
Although the collision tracking system reliably detects even very small unusual
movements of the desk surface, it cannot be 100% guaranteed to avoid injuries to
office users or nearby people. As a result, no liability for body injury or other damages
is assumed! Users are responsible for avoiding injury and other damage during office
operations.
3.7 Care and maintenance
When using the working desk for the first time, you may notice oil traces in lifting units.
Please wipe with a dry or slightly damp cloth. Commercial detergents available to clean
the office surfaces can be used. Only use care and cleaning products that are suitable for
the respective materials (wood, plastic, metal). The use of chemical or biological cleansers
is not required. The electric height adjustment mechanism of the desk does not require