ページを印刷するFAQ
1. Model doesn't stick to the build platform
Bottom layer exposure time is too short, please set the exposure time longer.
Model bottom has very small contact with the build platform and please add more bottom layers.
Leveling is not well set and it will cause first layer too thick or one side is very thick and the other
side is very thin.
2. Model layer breakage
Printer is shaking during printing.
Release liner film is very loose due to long-time usage and need to be changed.
Build platform or resin tank is not fastened.
3. Mars 3 can' t work
We offer a full one-year warranty on the printer and 6-month warranty for the screen.
If your printer doesn't work please contact us at
and as to better help and
solve problems for you please add your order ID in your email.
4. Printing failure
If the model was not completely printed or failed, there might be some residues left in the resin,
which can be filtered out using a funnel when you save the rest resin back into its sealedbottle.
If you don't filter out the residues the platform may cause damage to the 4K screen when you're
printing next time. As to the left resin on the platform and tank, you can clean and wipe them up
using tissues.