Elegoo MARS 3 Руководство - Страница 15

Просмотреть онлайн или скачать pdf Руководство для 3D-принтеры Elegoo MARS 3. Elegoo MARS 3 18 страниц.

FAQ

1. Model doesn't stick to the build platform

Bottom layer exposure time is too short, please set the exposure time longer.

Model bottom has very small contact with the build platform and please add more bottom layers.

Leveling is not well set and it will cause ﬁrst layer too thick or one side is very thick and the other

side is very thin.

2. Model layer breakage

Printer is shaking during printing.

Release liner ﬁlm is very loose due to long-time usage and need to be changed.

Build platform or resin tank is not fastened.

3. Mars 3 can' t work

We oﬀer a full one-year warranty on the printer and 6-month warranty for the screen.

If your printer doesn't work please contact us at

and as to better help and

solve problems for you please add your order ID in your email.

4. Printing failure

If the model was not completely printed or failed, there might be some residues left in the resin,

which can be ﬁltered out using a funnel when you save the rest resin back into its sealedbottle.

If you don't ﬁlter out the residues the platform may cause damage to the 4K screen when you're

printing next time. As to the left resin on the platform and tank, you can clean and wipe them up

using tissues.