- ページ 4

水ポンプ DROPSA 3417000 SeriesのPDF マニュアルをオンラインで閲覧またはダウンロードできます。DROPSA 3417000 Series 9 ページ。 Micro-elettric pump

5. TECHNICAL CHARACTERISTICS

Electrical power supply:

Absorbed power

Working temperature

Operating humidity

Grade of mechanical protection

Lubricants

Preservation temperature

Level of continuous sound pressure

ATTENTION: do not use the machine with different voltage that shown on the nameplate.

Prior to shipping, the equipment is carefully packed in cardboard package. During transportation and storage, always

maintain the pump the right way up as indicated on the box. On receipt check that package has not been damaged. Then,

store the machine in a dry location.

PRECAUTIONS

It is necessary to carefully read the warnings and risks associated with using a lubricant pump. The operator must

understand how it works and must clearly understand the dangers by studying the user manual.

Power supply

Any type of intervention must not be carried out before unplugging the machine from power supply. Make sure that no

one can start it up again during the intervention.

All the installed electric and electronic equipment, reservoirs and basic components must be grounded.

Flammability

The lubricant generally used in lubrication systems is not flammable. However, it is advised to avoid contact with

extremely hot substances or naked flames.

Pressure

Prior to any intervention, check the absence of residual pressure in any branch of the lubricant circuit as it may cause oil

sprays when disassembling components or fittings.

Noise

Pump produces noise, not more than 70 dB(A).

CHARACTERISTICS

24, 110, 220, Vac 50 – 60 Hz Single phase

90 % rel. humidity

32÷250 cSt Mineral oil lubrucat

Max 2.5 W

- 15 ÷ + 60 °C

IP 54

-30 ÷ +90 °C

< 70 dB(A)