- ページ 6

水ポンプ DROPSA 3417000 SeriesのPDF マニュアルをオンラインで閲覧またはダウンロードできます。DROPSA 3417000 Series 9 ページ。 Micro-elettric pump

10. INSTRUCTIONS FOR USE

10.1 START UP

Damage to the power supply cable and housing can lead to contact with high voltage parts and present a danger to life:

• Check the integrity of the power supply cable and the unit prior to use.

• Where the cable or the unit is damaged do not operate the equipment!

• Replace the power supply cable with a new one.

• The unit should be opened and repaired ONLY by qualified personnel.

• The pump MUST NOT be submersed in fluids or utilised in environments which are particularly aggressive or

explosive/inflammable if not prepared for this purpose beforehand by the supplier.

• For correct fixing verify the distance between centres.

• Use gloves and safety glasses as required in the lubrication oil safety chart.

• DO NOT use aggressive lubricants with NBR gaskets and seals; if in doubt consult the Engineering Department of

Dropsa SpA, who will provide a chart with the details of recommended oils.

• DO NOT ignore dangers to health and observe all hygiene standards.

10.2 ACTION TO BE TAKEN PRIOR TO START UP

• Verify the integrity of the pump;

• Fill the reservoir with suitable lubricant (min/max indication on the reservoir);

• Ensure the pump is at working temperature and the tubing is free of air pockets;

• Ensure that any electrical connections have been effected correctly (CEI 64/8, IEC 364);

10.3 REGULATION

The only parameter which can be modified is the flow rate; turn adjustment knob clockwise (decrease) or unclockwise

(increase).

FLOW RATE ADJUSTMENT

FOR 1 CC PUMP

FOR 5 CC PUMP