- ページ 2

計測機器 Elektor Dual DC LISNのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Elektor Dual DC LISN 5 ページ。 150 khz – 200 mhz

ページを印刷する
Elektor Dual DC LISN ユーザーマニュアル

Tools needed

Flat Nose Pliers
›
Small flat-blade screwdriver
›
Philips screw driver
›
Soldering iron with larger chisel type tip, at least 100 W, plus solder
›

Contents of the KIT

1x 4-layer PCB 210296 with all SMT parts fitted on top and bottom
1x pre-drilled enclosure with ready-printed front panel layout
5x gold-plated, insulated, 4-mm banana sockets, rated for 24 A, 1 kV
User manual Dual DC LISN 150 kHz – 200 MHz | Assembly of the KIT
2/5
Assembly
Remove the locking washer and nut from both golden SMA connectors.
Carefully slide the PCB into the enclosure. Pay close attention to the
contact fingers soldered to the bottom of the PCB so they don't get
hooked by the edge of the enclosure and get damaged.