ページを印刷するMaintenance
If you encounter any failure or issue, it is imperative to fix it quickly and correctly.
Regular maintenance can make your device last longer and avoid unnecessary
outlays.
If you use the printer very frequently, smaller parts will wear and need replacing to keep
it running to the best of its function. You are recommended to change them as soon as
they need replacing, as this will prevent damage or wear to other parts.
Please visit support.ankermake.com for more detailed information whenever in need.
Spare Parts
Illustration
Potential Failure
or Issue
• The nozzle
is jammed by
foreign objectives,
and the extrusion
Nozzle
is uneven.
• The nozzle is
blocked and
nothing can be
extruded.
• Hot end jam.
• Malfunction.
Hot End
• Abnormal
temperature
display.
Silicone Shell
Cracked.
Debris buildup
Extrusion
causes
Motor /
insufficient
Reduction
extrusion or nozzle
Gear
jams.
• Sounds
abnormal noise
in the direction of
X/Y-axis Belts
the X/Y-axis.
• Misplacement
issue of the print
model.
25
Solutions
• Regular Maintenance
https://support.ankermake.com/s/article/
Routine-Maintenance-of-Nozzles
• Spare Part Replacement
Video:
https://support.ankermake.com/s/article/
How-to-Exchange-the-Nozzles
Article:
https://ankertechnologycompanyltd.
my.site.com/ankermakerenexternal/s/
article/How-to-Replace-the-Nozzle
Video:
https://support.ankermake.com/s/article/
How-to-Replace-the-Hotend
Article:
https://ankertechnologycompanyltd.
my.site.com/ankermakerenexternal/s/
article/How-to-Replace-the-Hotend-of-M5
Replace with a new one.
https://support.ankermake.com/s/
article/Maintenance-of-extrusion-motor-
reduction-gear
Video:
https://support.ankermake.com/s/article/
X-and-Y-Axis-Belt-Adjustment
Article:
https://support.ankermake.com/s/article/
How-to-Adjust-Belts-on-the-X-and-Y-Axis
Spare Parts
Illustration
Potential Failure
or Issue
• Sounds
Eccentric Nuts
abnormal noise
of the Extruder
when the X-axis
and Printing
moves.
Platform
• The nozzle
vibrates.
• Fuzzy and
frayed.
• Wears.
V-Wheel
• Sounds
abnormal noise
or vibrates when
working.
Solutions
Video:
https://support.ankermake.com/s/article/
V-Wheel-Adjustment
Article:
https://support.ankermake.com/s/article/
How-to-Adjust-the-Eccentric-Nut-of-the-
Extruder-and-Printing-Platform#content5
Video:
https://support.ankermake.com/s/article/
How-to-Replace-the-V-Wheel-of-X-Axis
https://support.ankermake.com/s/article/
How-to-Replace-the-V-Wheel-of-Y-Axis
Article:
https://support.ankermake.com/s/article/
How-to-Replace-the-V-Wheel-of-X-and-
Y-Axis
26