ページを印刷するSpecifications
• Specifications are subject to change without notice.
General
Power Input
AC 100~240V 50/60Hz
Power Consumption
350 W
Printing Parameters
Print Volume (LxWxH)
235×235×250 mm³
Standard Speed
250 mm/s, 2,500 mm/s² (Acceleration)
Operation Speed
50-250 mm/s
Print Precision
+/-0.1 mm (50x50x50 mm Box)
Nozzle Diameter
0.4 mm (Compatible with0.2/0.6/0.8 mm)
Filament Diameter
1.75 mm
Print Materials
PLA/PETG/TPU/ABS
Printing Features
Extruder
Ultra Direct Extruder
Heated Plate
PEI Soft Magnetic Steel
Extruder Temperature
Maximum 500°F (260°C)
Heating Plate
Maximum 212°F (100°C)
Temperature
Auto-Leveling
Auto 49 (7×7) Points
Filament Sensor
Broken Material Detection
Resume Printing
Supported
Operation Noise Level
50 dB
Interactive Features
Core: Dual XBurst®(1.2GHz) + XBurst®0(240MHz)
CPU
Marlin: STM32F407
Operation System
Linux
Connection
Wi-Fi (App, AnkerMake Slicer), USB Flash Drive; OTA Upgrade
1080p Image Match, Real-Time Monitoring Stream: 1MB
AI Recognition Camera
Timelapse Videos Supported at 1080p for MP4 Files. Frame Rate: 30fps
Night Vision
Infrared + White Light
Remote Control
AnkerMake App, AnkerMake Slicer; The Google Assistant, Amazon Alexa
Slicer Software
AnkerMake Slicer (macOS, Windows), Ultimaker Cura, PrusaSlicer
Supported File Formats
STL, OBJ
Size (without Filament
502x438x470 mm
Holder)
Net Weight
27.8 lb / 12.6 kg (varies by region)
Gross Weight
34.6 lb / 15.7 kg (varies by region)
29
Notice
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures: (1) Reorient or relocate the
receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect
the equipment into an outlet on a circuit different from that to which the receiver is connected. (4)
Consult the dealer or an experienced radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used
in fixed/mobile exposure condition. The min separation distance is 20cm.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain
compliance with FCC regulations.
The following importer is the responsible party
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: 1-800-988-7973
IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject
to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
IC RF Statement:
When using the product, maintain a distance of 20cm from the body to ensure compliance with RF
exposure requirements.
Lors de l'utilisation du produit, maintenez une distance de 20cm du corps afin de vous
conformer aux exigences en matière d'exposition RF.
This product complies with the radio interference requirements of the European
Community.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this device is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU.For the declaration of conformity,
visit the Web site: https://ankermake.com.
This product complies with the radio interference requirements of the United Kingdom
30