ページを印刷する
KNOW YOUR PIZZA MAKER
BEFORE FIRST USE
IMPORTANT! Always place and operate the appliance on a flat, solid, clean, dry and heat-
resistance surface.
IMPORTANT! Place the pizza maker on a heat-resistant surface or use a heat resistant mat to
prevent heat damage to the bench surface.
◆ Unpack the appliance and check if all parts are there and undamaged. In case of shipping damage
or incomplete package, return the product to Kmart.
◆ Clean the inside and outside of the appliance with a damp cloth or sponge. Wipe dry with a soft
dry cloth.
◆ WARNING! Do not immerse the appliance in water or any other liquid to clean.
◆ Place the appliance on a flat, heat resistant stable surface and ensure a minimum of 10cm free
space around the appliance. Do not operate your appliance inside a cabinet or under a wall cabinet.
◆ Plug the appliance into an electrical power outlet.
◆ Note: Make sure the voltage indicated on the appliance matches the local voltage before
connecting the appliance to mains power. Rated voltage: 220-240V~ 50-60Hz.
◆
Pre-heat the appliance first by setting the temperature control knob to "MAX" setting.
appliance to heat up for approximately 5 minutes. Apply a thin coating of cooking oil to the
cooking plates and carefully rub it in with a paper towel. You only need to condition the cooking
plates when using your pizza maker for the first time.
◆ CAUTION: The baking plates will get very hot during use.
◆ IMPORTANT! On first use there may be a small amount of haze and an odour emitted from
the appliance. This is perfectly normal and will subside after few minutes of use.
◆ Unplug the appliance and now it is ready for use.
3
1. Handle
2. Backing plates
3. Temperature control
4. Red power indicator
5. Green ready indicator
6. Rubber feet
Allow the