anko FS-837 Manual do utilizador - Página 3

Procurar online ou descarregar pdf Manual do utilizador para Utensílios de cozinha anko FS-837. anko FS-837 6 páginas.

KNOW YOUR PIZZA MAKER

BEFORE FIRST USE

IMPORTANT! Always place and operate the appliance on a flat, solid, clean, dry and heat-

resistance surface.

IMPORTANT! Place the pizza maker on a heat-resistant surface or use a heat resistant mat to

prevent heat damage to the bench surface.

◆ Unpack the appliance and check if all parts are there and undamaged. In case of shipping damage

or incomplete package, return the product to Kmart.

◆ Clean the inside and outside of the appliance with a damp cloth or sponge. Wipe dry with a soft

dry cloth.

◆ WARNING! Do not immerse the appliance in water or any other liquid to clean.

◆ Place the appliance on a flat, heat resistant stable surface and ensure a minimum of 10cm free

space around the appliance. Do not operate your appliance inside a cabinet or under a wall cabinet.

◆ Plug the appliance into an electrical power outlet.

◆ Note: Make sure the voltage indicated on the appliance matches the local voltage before

connecting the appliance to mains power. Rated voltage: 220-240V~ 50-60Hz.

◆

Pre-heat the appliance first by setting the temperature control knob to "MAX" setting.

appliance to heat up for approximately 5 minutes. Apply a thin coating of cooking oil to the

cooking plates and carefully rub it in with a paper towel. You only need to condition the cooking

plates when using your pizza maker for the first time.

◆ CAUTION: The baking plates will get very hot during use.

◆ IMPORTANT! On first use there may be a small amount of haze and an odour emitted from

the appliance. This is perfectly normal and will subside after few minutes of use.

◆ Unplug the appliance and now it is ready for use.

1. Handle

2. Backing plates

3. Temperature control

4. Red power indicator

5. Green ready indicator

6. Rubber feet

Allow the