ページを印刷する
Next, rotate the motor spindle until the "flat" surface is facing up.
•
Slide the fan blade onto the spindle ensuring the screw is lined up with the "flat"
•
surface on the spindle as shown.
Note: you may need to unscrew (anti-clockwise) the screw a few turns to allow the
fan blade to slide onto the motor spindle.
Push the fan blade on all the way until the front face of the fan blade is flush with
•
the end of the motor spindle. Note: Only use a hand screw driver to tighten the
screw.
Page 11 of 16