ページを印刷する
•
Take the front grill and open up all the side locking clips.
Using a small Philips Head Screw Driver remove the small nut and bolt from the
•
bottom of the grille and keep in a safe place.
•
Place the front grille into position by lining up the location fork over the top of the
rear grill as shown and push down.
Align the two small holes in the rim of the front and rear grilles (at the bottom), then
•
using the small nut and bolt, fasten the two grilles together.
•
Secure the grilles by closing all the clips over the outer
rim.
Page 12 of 16