- ページ 5

ベビー＆幼児用家具 anko 42956426のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。anko 42956426 8 ページ。 2 tone wooden cot

ページを印刷する
anko 42956426 取扱説明書
To adjust Mattress Base Height
1
1
Carefully lay the cot down on the
Side Panel.
Remove the 4 x Filler Bolts and
Nuts for the lower base position
on the End Panels.
3
3
Carefully slide the Mattress Base
to the lower position and attach
with 4 x 30mm bolts.
2
2
Remove 4 x 30mm Mattress
Base bolts.
4
4
Refit 4 x Filler Bolts and Nuts
to the upper Mattress Base
Mounting holes to prevent
possible finger entrapment.
The cot is now ready for use in low base mode.
NOTE: Loosening the bolts
of one side panel will assist
in avoiding any scratches or
dents to your Cot whilst sliding
the mattress base down to the
lower position. If side panel
bolts are loosened during this
process, ensure they are re-
tightened after you have moved
the mattress base.
5
5
Carefully stand the cot upright.
5