anko 42956426 사용 설명서 - 페이지 5

{카테고리_이름} anko 42956426에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. anko 42956426 8 페이지. 2 tone wooden cot

To adjust Mattress Base Height

Carefully lay the cot down on the

Side Panel.

Remove the 4 x Filler Bolts and

Nuts for the lower base position

on the End Panels.

Carefully slide the Mattress Base

to the lower position and attach

with 4 x 30mm bolts.

Remove 4 x 30mm Mattress

Base bolts.

Refit 4 x Filler Bolts and Nuts

to the upper Mattress Base

Mounting holes to prevent

possible finger entrapment.

The cot is now ready for use in low base mode.

NOTE: Loosening the bolts

of one side panel will assist

in avoiding any scratches or

dents to your Cot whilst sliding

the mattress base down to the

lower position. If side panel

bolts are loosened during this

process, ensure they are re-

tightened after you have moved

the mattress base.

Carefully stand the cot upright.