- ページ 3

コントロールユニット DRYDEN AQUA NETBUSのPDF テクニカル・マニュアルをオンラインで閲覧またはダウンロードできます。DRYDEN AQUA NETBUS 4 ページ。 Wired internet device

Sugar Valley

2 Starting the systsm

When the NetBus box is opened, you will find the following parts:

• NETBUS module.

• MODBUS RTU wire connection

• Ethernet wire

The device can power from an 12V external adapter, or from the device.

To install, complete the following steps:

1. Connect the NETBUS module as follows:

Power 9V a

The Ethernet port must be connected to the router/switch you have available.

The RS485 MODBUS RTU port must be connected to the connector

labeled WIFI on your Sugar Valley device.

2. Once the connection is made, toggle the power switch on your Sugar Valley

device and wait 60 seconds.

3. Configure the Internet connection as detailed in the Sugar Valley

instructions (Main Menu> Settings> Internet> Settings). It's recommended

to use DHCP as the connection parameter, but if you preffer, you can set

the parameters of a connection with fixed IP.

4. Once the settings are placed, check that your computer connects to the

Internet, if not, turn off and turn on the device to ensure that the

configuration parameters have been applied correctly.

USB

27V

Ethernet

10/100

RS485

MODBUS

RTU

Button

Page 3 de 4