DRYDEN AQUA NETBUS 기술 매뉴얼 - 페이지 3
{카테고리_이름} DRYDEN AQUA NETBUS에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DRYDEN AQUA NETBUS 4 페이지. Wired internet device
페이지 인쇄Sugar Valley
2 Starting the systsm
When the NetBus box is opened, you will find the following parts:
• NETBUS module.
• MODBUS RTU wire connection
• Ethernet wire
The device can power from an 12V external adapter, or from the device.
To install, complete the following steps:
1. Connect the NETBUS module as follows:
Power 9V a
The Ethernet port must be connected to the router/switch you have available.
The RS485 MODBUS RTU port must be connected to the connector
labeled WIFI on your Sugar Valley device.
2. Once the connection is made, toggle the power switch on your Sugar Valley
device and wait 60 seconds.
3. Configure the Internet connection as detailed in the Sugar Valley
instructions (Main Menu> Settings> Internet> Settings). It's recommended
to use DHCP as the connection parameter, but if you preffer, you can set
the parameters of a connection with fixed IP.
4. Once the settings are placed, check that your computer connects to the
Internet, if not, turn off and turn on the device to ensure that the
configuration parameters have been applied correctly.
USB
27V
Ethernet
10/100
RS485
MODBUS
RTU
Button
Page 3 de 4