- ページ 3

屋外ライト DS Produkte PY-F1094のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。DS Produkte PY-F1094 9 ページ。 Daylight floor lamp

EN
Dear Customer,
Thank you for choosing this daylight fl oor lamp. If you have any
questions, please contact customer service through our website:
www.dspro.de/kundenservice

Explanation of symbols and signal words

Danger symbol. Read and follow the related safety
instructions.
Read instruction manual before using.
Protection class III
Circuit symbol for DC voltage
Protection class II
Only use indoors!
Coaxial power connector polarity
Energy effi ciency level V
Safe electrical isolation (transformer)
Independent converter / transformer
WARNING warns of possible serious injuries and danger to life
CAUTION
warns of mild to moderately severe injuries
NOTICE
warns of material damage

Intended use

The product is intended for lighting in dry indoor areas only. It
is not suitable for use in damp or humid rooms, e.g. bathrooms.
The product must not be used for shining light directly on hu-
mans, animals or plants.
The product is not a toy!
The product is intended for private, non-commercial use.
Use the product only as described in the instruction manual.
Any other use is regarded as improper.

Safety instructions

Please read all safety instructions, technical data and other
important information to avoid hazards.
WARNING – shock hazard
Only use and store in closed areas.
Do not use in areas with high humidity.
Never immerse product and the connection cable in water
or other liquids, and ensure that they do not fall into water or
become wet.
Should the product fall into water, immediately disconnect the
power supply. Do not try to pull the device out of the water while
it is connected to the mains!
Never touch the product or connection cable with wet hands if
the product is connected to the mains.
The product must always be unplugged before cleaning.
Article number: 05322
WARNING – fi re and explosion hazard
Do not use the product in rooms containing easily fl ammable
or explosive substances. Never operatethe product near gas
sources.
Do not coverthe product during operation, and ensure that
there is suffi cient air circulation.
The luminaire may only be installed at a minimum distance of
20 cm from fl ammable materials, such as curtains, etc.
WARNING – risk of injury!
Keep plastic bags and foils away from children and animals.
There is a danger of suff ocation.
Do not look directly into the light or use optical aids to look
directly at it. Never point the light directly at other people or
animals.
Make sure that the connection cable is not a tripping hazard.
Do not operatethe product if there is visible damage to the
product or the connection cable, or if the product has been ex-
posed to liquid.
Only use the product if it has been correctly assembled.
Do not make any changes to the product. The LED cannot be
replaced. To avoid hazards, the product may only be taken
apart and/or repaired by the manufacturer, customer service
or a person with similar qualifi cations (at a workshop, for ex-
ample).
NOTICE – risk of material and property damage
Only use and storethe product in normal ambient temperatures
up to +40 °C.
Only use the power adapter included and make sure the pow-
er outlet it is plugged into has been properly installed and is
compatible with the power adapter's technical data. The socket
must be easily accessible, so that the network connection can
be quickly disconnected.
Protect the product from sources of heat, open fl ames, pro-
longed humidity and impacts.
Do not place any heavy objects on the product or its connec-
tion cable.
If the product is moved from colder to warmer areas, condensa-
tion may also form inside the device. Wait until the product has
reached room temperature before turning it on.
Lay the connection cable in such a way that it is not crushed or
bent and does not come into contact with hot surfaces.
Turn off and unplug the product immediately in case of damage
or malfunction.
Unplug the power adapter from the outlet before a storm.
When pulling out of the socket, always pull on the adapter and
never on the power cord. Never pull or carry the product by the
power cord.
Only use original accessories from the manufacturer so as not
to impair the functioning of the product and to prevent possible
damage.
To protect the surface, do not use corrosive or abrasive clean-
ers. Wipe the product with a damp cloth as required. Then dry
it off .
Instruction manual