- ページ 19

セキュリティシステム DAITEM SH601AUのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。DAITEM SH601AU 20 ページ。 Alarm pendant

10. Battery status indication

Testing the battery status

The system control panel or telephone dialler do not

provide a "batteries flat" indication.

• Brieﬂy press (less than 2 s) the pendant push-button.

The red LED should light up brieﬂy indicating that the

batteries are still charged.

• When the pendant's batteries are ﬂat, the LED does

not light up when the push-button is brieﬂy pressed.

When this is the case, the pendant must be changed

within one month.

REMINDER: The pendant has been designed with a non-

dismountable enclosure to ensure it is watertight. The

batteries cannot be replaced. The pendant must be

replaced when it reaches the end of its battery life.

• Radio:

- transmission: TwinBand

- ERP (effective radiated power): 10 mW max.

- average radio range: 200 m in free ﬁeld conditions

• Customisation of commands issued: push-button

and sliding part can be programmed separately

• Use: portable

• Enclosure: watertight and non-dismountable

• Power supply: 2 non-replaceable CR 2016 type 3 V

lithium batteries

• Dual-coloured LED to indicate:

- battery status

- radio command transmission

- programming

• Battery life = product service life:

- 10 years based on 1 activation per day

- 5 years based on 5 activations per day

• Degree of protection: IP 67 (can be immersed at a

depth of 1 m for 30 min.)

• Colour: White and grey

• Weight: 33 g

• Operating temperature: + 0 °C to + 55 °C

• Dimensions (L x w x h): 37.3 x 14 x 88 mm

• Delivered with: 1 quick-fastener, 1 neck cord (ﬁtted

with a breakaway release) and 1 clip holder

(434.5/869 MHz)