DAITEM SH601AU Installation Manual - Page 19

Browse online or download pdf Installation Manual for Security System DAITEM SH601AU. DAITEM SH601AU 20 pages. Alarm pendant

Print Page

10. Battery status indication

Testing the battery status

The system control panel or telephone dialler do not

provide a "batteries flat" indication.

• Brieﬂy press (less than 2 s) the pendant push-button.

The red LED should light up brieﬂy indicating that the

batteries are still charged.

• When the pendant's batteries are ﬂat, the LED does

not light up when the push-button is brieﬂy pressed.

When this is the case, the pendant must be changed

within one month.

REMINDER: The pendant has been designed with a non-

dismountable enclosure to ensure it is watertight. The

batteries cannot be replaced. The pendant must be

replaced when it reaches the end of its battery life.

• Radio:

- transmission: TwinBand

- ERP (effective radiated power): 10 mW max.

- average radio range: 200 m in free ﬁeld conditions

• Customisation of commands issued: push-button

and sliding part can be programmed separately

• Use: portable

• Enclosure: watertight and non-dismountable

• Power supply: 2 non-replaceable CR 2016 type 3 V

lithium batteries

• Dual-coloured LED to indicate:

- battery status

- radio command transmission

- programming

• Battery life = product service life:

- 10 years based on 1 activation per day

- 5 years based on 5 activations per day

• Degree of protection: IP 67 (can be immersed at a

depth of 1 m for 30 min.)

• Colour: White and grey

• Weight: 33 g

• Operating temperature: + 0 °C to + 55 °C

• Dimensions (L x w x h): 37.3 x 14 x 88 mm

• Delivered with: 1 quick-fastener, 1 neck cord (ﬁtted

with a breakaway release) and 1 clip holder

(434.5/869 MHz)