- ページ 9

セキュリティシステム DSC SCW9045-868のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DSC SCW9045-868 20 ページ。 Self contained wireless
DSC SCW9045-868 にも：ユーザーマニュアル (20 ページ)

ページを印刷する

Bypassing Zones

With the system disarmed.

1. Press

to enter the function menu. The keypad will display "Press

2. Press

Bypass Zones".

3. Enter the two-digit number of the zone(s) to be bypassed (01-34).

You can also use the

zone. The keypad will display "Zone Name". "B" will appear on the display to show that the zone is

bypassed. If a zone is open (e.g., door with door contact is open), the keypad will display "Zone Name"

O". If you bypass the open zone, a "B" will replace the "O".

4. To unbypass a zone, enter the two-digit number of the zone(s) to be bypassed (01-34). You can

also use the

disappear from the display to show that the zone is no longer bypassed.

5. To exit bypassing mode and return to the Ready state, press

Activating All Bypassed Zones

To remove bypass (all zones):

1. Press

, then your [access code] (if necessary).

2. Press

3. To exit bypassing mode and return to the Ready state, press

Recalling Bypassed Zones

To recall the last set of bypassed zones:

1. Press

, then your [access code] (if necessary).

2. Press

3. To exit bypassing mode and return to the Ready state, press

Bypass Group

A Bypass Group is a selection of zones programmed into the system. If you bypass a group of zones

on a regular basis, you can program them into the Bypass Group, so that you do not have to bypass

each zone individually every time. Only one Bypass Group can be programmed.

To program a Bypass Group:

1. Press

, then your [access code] (if necessary).

2. Enter the two-digit numbers (01-34) of the zones to be included in the Bypass Group or

use the

to select the zone.

3. To save the selected zone into the group, press

4. To exit bypassing mode and return to the Ready state, press

NOTE: If an access code is required to enter bypassing, only the Master Code and codes with

Supervisory enabled can set the Bypass Group.

To select a Bypass Group when arming the system:

1. Press

, then your [access code] (if necessary).

2. Press

. The next time the system is armed, the zones in this group will be bypassed.

3. To exit bypassing mode and return to the Ready state, press

NOTE: A Bypass Group is only recalled if the system is armed/disarmed after programming the by-

pass group.

NOTE: This feature is not to be used in UL Listed installations.

, then your [access code] (if required). The keypad will display "Scroll to < >

keys to find the zone to be bypassed, and then press

keys to find the zone, and then press

keys to find the zone to be included in the bypass group, then press

to select the zone. The "B" will

for < > Zone Bypass".

to select the