- ページ 7

医療機器 3M Littmann 4000のPDF マニュアルをオンラインで閲覧またはダウンロードできます。3M Littmann 4000 11 ページ。 Electronic stethoscope
3M Littmann 4000 にも：マニュアル (11 ページ)

ページを印刷する

The recording process captures the full

frequency range and stores it on the

soundtrack. This allows the ability to

change the frequency mode from bell,

diaphragm or extended range during

playback. To ensure that clear

auscultation sounds are captured, do not

adjust volume or frequency mode

during recording.

Playback

To play back a recording, select the

desired soundtrack and press the

PLAY button. When the entire

soundtrack has been played, there is a

one second delay before the

soundtrack will play again. To end

playback, press the ON/OFF button.

Half Speed

Press and hold the PLAY button

Playback

for two seconds. To stop the

continuous half speed and return to

normal playback, press the PLAY

button. To end playback, press the

ON/OFF button.

Erase Single

Erase soundtracks by recording

Soundtracks

new sounds `onto them. Erased

soundtracks cannot be recovered.

Erase All Sound

Press and hold the

Tracks

SOUNDTRACK SELECTOR

(use with caution)

button for two seconds. This will

erase all soundtracks. Erased

soundtracks cannot be recovered.

Data transmission

1.Select the soundtrack to be

to another Littmann

transmitted and the soundtrack to

Electronic

receive the transmission.

Stethoscope

2. Position the two IR ports within

Model 4000

two feet.

Sending a copy of

a soundtrack to a

computer using

Microsoft®

Windows®

95/98/2000

with

an infrared (IR)

port

1. Prompts may vary between versions of Windows and are the responsibility of the Microsoft.

References to Windows as it pertains to use of the Littmann Electronic Stethoscope Model 4000 are

for clarification only. Please consult your Microsoft users manual for specific instructions.

Microsoft® and Windows® are trademarks of Microsoft Corporation.

3. Press the RECEIVE button on the

receiving Model 4000 then press the

TRANSMIT button on the

transmitting Model 4000. The arrow

will blink until the infrared

connection is made.

4. Transmission is indicated on the

Model 4000 display by a rotating

5. Progress of the transmission is

shown on the Model 4000 display

with the

symbol. To

stop the transmission, press the

ON/OFF button on either stethoscope.

1. Select the soundtrack to be

transmitted.

2. Position the two IR ports within

two feet.

3. Press the Model 4000 TRANSMIT

button. The arrow will blink until the

infrared connection is made.

4. Transmission is indicated on the

Model 4000 display by a rotating

The computer status bar will display

two red lights flashing towards one

another.

5. Progress of the transmission is

shown on the Model 4000 display

with the

symbol.

6. WINDOWS 95/98 – Downloaded

soundtracks are stored in: C:\My

Received Files.