- ページ 11

スピーカー Foxpro HELLCAT TX433XLのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Foxpro HELLCAT TX433XL 16 ページ。
Foxpro HELLCAT TX433XL にも：取扱説明書 (20 ページ)

Fav Mut OR turned on (see section 3-5), it will not begin to play until you hit the Mute

button to Unmute the Hellcat.

Decoy/Aux allows for remote operation of the Hellcat's built-in decoy, as well as anything

connected to the Aux jack. If you have an external decoy connected to the Aux Jack, please

note that both decoys will turn on and off at the same time. Please familiarize yourself

with Section 2 of this Operating Manual when connecting accessories to the Aux Jack.

Recall will recall and play the last sound played through the Hellcat at the volume it was

last playing at.

Timer Reset will reset the stand timer without the need to go into the back menu.

Backlight turns on the red backlight for the selected time without performing any other

functions.

4-14 Remote Settings: Download List

Any time you reprogram the Hellcat to add new sounds or rearrange existing sounds, you must download a

new copy of the play list to the transmitter. This menu item will guide you through that process. To

download the playlist, you will need a 3.5mm stereo male-to-male cable (included). See section 5-3 for

more information.

The TX433XL can display your sounds either by general numerical listing (Sound List) or by category listing

(Categories). Sound categories are the easiest to navigate if you have a large number of sounds. The

TX433XL supports up to 25 unique categories. To configure the view setting, highlight the "View" menu

item, push the "Play/Select" button, and then use the "Scroll Up" or "Scroll Down" buttons to cycle through

the options. When the appropriate setting is selected, push the "Play/Select" button to set it. This setting is

retained between power cycles.

The TX433XL displays your sound list in a numerical format (When is Sound List Mode) based upon the

index value of each sound file. The sounds are numbered from 000 – 299. You can choose to either have the

index number values visible in your sound list or you can hide them. The advantage of hiding the numbers is

that the sound names might be easier to read. The options for this setting are "Show" and "Hide." To toggle

the options, highlight "Snd Nums" in the menu, push the "Play/Select" button, use the "Scroll Up" or "Scroll

Down" button to cycle the options, then push "Play/Select" to set it. This setting is retained between power

cycles.

The About Info screen displays a variety of information pertaining to version number, number of sounds

loaded, number of categories, number of favorites, and transmitter health.

If cable detect is turned on, the transmitter will automatically prompt you to perform the download list

function when a 3.5mm stereo cable is connected to the sound upload jack. You can manually initiate the

download list process, if you prefer, by disabling this feature.

The Hellcat can store up to 300 sounds in total. From the factory, it's loaded with 75 premium sounds along

with all current free sounds. All free sounds are prefixed with "Free" for easy recognition. The main

difference between premium sounds and free sounds is the premium sounds are all live animal recordings

whereas the free sounds contain both manmade and real sounds. The Hellcat is capable of playing