- ページ 9

スピーカー Foxpro HELLCAT TX433XLのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Foxpro HELLCAT TX433XL 16 ページ。
Foxpro HELLCAT TX433XL にも：取扱説明書 (20 ページ)

4-3 Sound Settings: Volume Step

The TX433XL has a range of volume steps from 0 – 20. Increasing the volume in the field by increments of 1

may be too slow for some, therefore, this stepping value is configurable. You can choose from 1, 2, and 3.

To change the volume step value, highlight the "Volume Step" menu item, push the "Play/Select" button,

then use the "Sound Up" or "Sound Down" scroll buttons to cycle through the options. When the desired

option is set, push "Play/Select" to lock it in. The value assigned to the Volume Step option will be retained

between power cycles.

This menu allows you to specify which mode of sound playback the Hellcat operates on. The available

options are repeat, single play, and jukebox. The default setting is repeat. In Repeat mode, the Hellcat will

play the selected sound repeatedly until you interrupt it. In Single play mode the sound will play a single

time, then stop. In Jukebox mode the sounds play a single time, and then advances to the next sound and

plays it a single time, continuing this until all the sounds have been played. At that point, it will start at the

first sound again and continue the pattern. The Play Mode setting is NOT stored between power cycles. You

will need to change this setting each time you power on the Hellcat remote.

During normal operation, if the Hellcat is muted and you request to play a favorite, the sound is queued for

playback, but it cannot be heard until the caller is un-muted. Favorite mute override will take care of this

and eliminate the need for un-muting the sound upon preset activation. It works by initially checking to see

if mute is active and, if it is, un-mute the Hellcat prior to initiating playback of the sound. Turning on favorite

mute override can be done by accessing Sound Settings, highlighting the "Fav Mute OR" menu item,

pushing "Play/Select", then using the "Sound Up" or "Sound Down" to toggle between off and on. Push

"Play/Select" to set it. This setting is retained between power cycles.

This setting allows you to change the intensity of the red backlight in a range from 5% - 100%. A lower

setting can be a better choice for nighttime use, as there will be a lower intensity of light, and the lower the

intensity, the better your battery life will be. We have chosen red as the backlight color, as this color is the

best to use for your eyes adjusting to a dark environment. To adjust this setting, highlight the Backlight

menu option, push the "Play/Select" button, and then use the "Sound Up" or "Sound Down" scroll buttons

to cycle through the values. When you have selected the desired backlight intensity, push the "Play/Select"

button a final time to set it. This setting is retained between power cycles.

This setting allows you to set the duration for the backlight timeout. The backlight illuminates every time a

button is pressed. If the backlight is illuminated and you do not push a button within the set period of time,

the backlight will automatically shut off. Available values are 15 seconds, 30 seconds, and 1 minute. Keeping

this at a lower value will help promote maximum battery life. To adjust this setting, highlight the Backlight

T.O. menu option, push the "Play/Select" button, and then use the "Scroll Up" or "Scroll Down" scroll

buttons to cycle through the values. When you have selected the desired backlight timeout period, push the

"Play/Select" button a final time to set it. This setting is retained between power cycles.

This setting allows you to adjust the screen contrast. In 'normal' display mode (see 4-9 Display/Power: LCD

Mode), the higher the value, the darker the text will appear. In 'Inverse' display mode, the higher the value,

the darker the background will appear. To change this value, highlight the contrast menu item, push the

"Play/Select" button, then use the "Scroll Up" or "Scroll Down" buttons to cycle through the values. When

you have selected the desired contrast setting, push "Play/Select" a final time to set it. This setting is

retained between power cycles.