- ページ 2

コントロールユニット DSC Power SeriesのPDF クイック・リファレンス・マニュアルをオンラインで閲覧またはダウンロードできます。DSC Power Series 2 ページ。 Neo image sensor
DSC Power Series にも：リファレンス・マニュアル (2 ページ), マニュアル (18 ページ), インストレーション・マニュアル (14 ページ), インストレーション・インストラクション (2 ページ), クイックマニュアル (4 ページ), 取付説明書 (11 ページ)

To add access codes

Press

and enter the 4-digit Master Code

•

• 1 long beep indicates an error, enter the Master Code again

• 3 short beeps indicates acknowledgement, enter a 2 digit user number to

be programmed. User Codes 01-48 are available for the PC1616. User Codes

01-72 are available for the PC1832. User Codes 01-95 are available for

the PC1864.

• Enter the 4 digits for the code

• Enter another 2 digit number to program another code or press to exit

To remove access codes

• Press

and enter the 4-digit Master Code

1 long beep indicates an error, enter the Master Code again

•

• 3 short beeps indicate acknowledgement, enter the 2 digit user number to be

removed. User Codes 01-48 are available for the PC1616. User Codes 01-72

are available for the PC1832. User Codes 01-95 are available for the PC1864.

• Enter to remove the code and press to exit

• Once the code has been removed, press to exit

To enable door chime feature

• Press and hold (Door Chime) for 2 seconds

3 beeps = ON; 1 long beep = OFF

•

Changing keypad buzzer tone

• If using a PK5500 keypad, press and enter the 4-digit

Master Code then proceed with the following:

- Scroll to the phrase "Buzzer Control" and press

• If using an LED or fixed-message keypad, press

4-digit Master Code then proceed with the following:

- Press and hold (Left Arrow)

- The tone will change

- When the desired tone is identified, release (Left Arrow)

To sound an alarm manually

• Press and hold (Fire) or (Emergency) or

for 2 seconds

For more information

• Visit www.dsc.com to download the complete user manual

Product specifications and availability subject to change without notice. Certain product names mentioned herein

From Tyco Security Products

and enter the

(Panic)