To add access codes
Press
and enter the 4-digit Master Code
•
• 1 long beep indicates an error, enter the Master Code again
• 3 short beeps indicates acknowledgement, enter a 2 digit user number to
be programmed. User Codes 01-48 are available for the PC1616. User Codes
01-72 are available for the PC1832. User Codes 01-95 are available for
the PC1864.
• Enter the 4 digits for the code
• Enter another 2 digit number to program another code or press to exit
To remove access codes
• Press
and enter the 4-digit Master Code
1 long beep indicates an error, enter the Master Code again
•
• 3 short beeps indicate acknowledgement, enter the 2 digit user number to be
removed. User Codes 01-48 are available for the PC1616. User Codes 01-72
are available for the PC1832. User Codes 01-95 are available for the PC1864.
• Enter to remove the code and press to exit
• Once the code has been removed, press to exit
To enable door chime feature
• Press and hold (Door Chime) for 2 seconds
3 beeps = ON; 1 long beep = OFF
•
Changing keypad buzzer tone
• If using a PK5500 keypad, press and enter the 4-digit
Master Code then proceed with the following:
- Scroll to the phrase "Buzzer Control" and press
• If using an LED or fixed-message keypad, press
4-digit Master Code then proceed with the following:
- Press and hold (Left Arrow)
- The tone will change
- When the desired tone is identified, release (Left Arrow)
To sound an alarm manually
• Press and hold (Fire) or (Emergency) or
for 2 seconds
For more information
• Visit www.dsc.com to download the complete user manual
Product specifications and availability subject to change without notice. Certain product names mentioned herein
may be trade names and/or registered trademarks of other companies. © 2013 Tyco Security Products.
From Tyco Security Products
and enter the
(Panic)
Pagina afdrukken