DSC Power Series Snelle referentiehandleiding

Blader online of download pdf Snelle referentiehandleiding voor {categorie_naam} DSC Power Series. DSC Power Series 2 pagina's. Neo image sensor
Ook voor DSC Power Series: Referentiehandleiding (2 pagina's), Handmatig (18 pagina's), Installatiehandleiding (14 pagina's), Installatie-instructies (2 pagina's), Beknopte handleiding (4 pagina's), Handleiding voor installatie-instructies (11 pagina's)

From Tyco Security Products

PowerSeries

Security System

Quick Reference Guide

To arm entire system – both interior and perimeter

Close all windows and doors (the green Ready light will turn ON)

•

• Press and hold (Away) for 2 seconds (the keypad will beep rapidly

5 times and the red Armed light will turn ON)

• Exit premises before the delay time expires

To disarm system when you return

When you enter through the door, the keypad will emit a steady warning tone

•

• Enter your 4-digit Master Code or User Code (the armed light will turn OFF)

• If you make an error, press and enter the 4-digit code again

To arm perimeter of building and still move freely inside

• Press and hold (Stay) for 2 seconds

To arm system with door or window open

Press

while disarmed

•

• The Bypass light will flash

• Enter the 2-digit zone number to be bypassed

• To exit the Bypass function press

To silence alarm

Enter your 4-digit Master Code or User Code

•

When trouble light comes on

Press

•

• Some keypads will describe the Trouble (full-message keypads); others will

only identify the Trouble number (fixed-message and LED keypads)

• If Trouble number 8 is lit, the time and date needs to be reset

• For all other Trouble conditions, contact your security provider

To set time and date

•

Press

and enter the 4-digit Master Code

• 1 long beep indicates an error, press and enter the Master Code again

• After 4 short beeps, press then 10 digits, 2 each for the hour, minute,

month, day and year (HH:MM MM/DD/YY)

- Use a 24-hour clock (e.g. 8:30 pm = 20:30)

- Use 2 digits each to indicate the month and day (e.g. March 8 = 03 08)