- ページ 2
ハンドヘルド Attainment Company GoTalk 32+のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Attainment Company GoTalk 32+ 4 ページ。
ページを印刷するGoTalk 32+
The GoTalk 32+ is a voice output communication device with multiple messages
and levels. You decide the statement, word, or sound to be recorded on each
message key, and the image or word that will represent each message. Print the
overlay (grid with images or words) and record the messages: GoTalk 32+
is ready to go!
Levels
The GoTalk 32+ has five levels; each level stores its own set of 32 messages.
The level change button is on the front, to the right of the handle. The five
numbered green LEDs represent the levels. To change levels, press and release
the green level button. A green LED indicating the current level will light. Press
and release the button again to move to the next level.
A Level Lock feature is available to prevent unwanted changing of the levels.
To lock the device onto a specific level, see Lock Options for details.
Volume
Volume up and volume
down buttons are located
on the front, to the left of
the handle. A beep will
sound when adjusting the
volume up or down. The
beep will not sound when
the volume has reached
the maximum or minimum
setting.
2
Core Vocabulary Messages
Messages recorded on the Core Vocabulary
keys will play the same message on every level;
they are not connected to a specific level. Each
of these three messages have 17 seconds
of record time. The overlay strip for the core
vocabulary messages is separate from the
overlay for the grid of 32 messages. To record
or re-record one or all three Core Vocabulary,
follow Record Messages instructions.
Record Messages
Messages have 10 seconds of record time. Turn
on the GoTalk 32+: all LEDs cycle through once,
device beeps, a green LED flashes indicating
the level currently in use. To record, press and
release the Record button (on the back); a Level
LED (green) and the Record LED (red) will light.
While both LEDs are lit, press and release the
message key to be recorded on; the Record LED
blinks to indicate the device is recording. Speak
clearly while recording, then press any key to
stop recording. Continue to record additional
messages or exit Record mode. To exit Record
mode, press and release the Record button: both
LEDs turn off. A Record Lock feature is available
to prevent unwanted recording or erasing of
messages. To lock the recording ability, see
Lock Options for details. Also, see Tips and
FAQs for recording tips.
Play Messages
Press and release a message button; a green
level LED will blink while the recording plays.