Attainment Company GoTalk 32+ User Manual - Page 2

Browse online or download pdf User Manual for Handhelds Attainment Company GoTalk 32+. Attainment Company GoTalk 32+ 4 pages.

Print Page

GoTalk 32+

The GoTalk 32+ is a voice output communication device with multiple messages

and levels. You decide the statement, word, or sound to be recorded on each

message key, and the image or word that will represent each message. Print the

overlay (grid with images or words) and record the messages: GoTalk 32+

is ready to go!

Levels

The GoTalk 32+ has five levels; each level stores its own set of 32 messages.

The level change button is on the front, to the right of the handle. The five

numbered green LEDs represent the levels. To change levels, press and release

the green level button. A green LED indicating the current level will light. Press

and release the button again to move to the next level.

A Level Lock feature is available to prevent unwanted changing of the levels.

To lock the device onto a specific level, see Lock Options for details.

Volume

Volume up and volume

down buttons are located

on the front, to the left of

the handle. A beep will

sound when adjusting the

volume up or down. The

beep will not sound when

the volume has reached

the maximum or minimum

setting.

Core Vocabulary Messages

Messages recorded on the Core Vocabulary

keys will play the same message on every level;

they are not connected to a specific level. Each

of these three messages have 17 seconds

of record time. The overlay strip for the core

vocabulary messages is separate from the

overlay for the grid of 32 messages. To record

or re-record one or all three Core Vocabulary,

follow Record Messages instructions.

Record Messages

Messages have 10 seconds of record time. Turn

on the GoTalk 32+: all LEDs cycle through once,

device beeps, a green LED flashes indicating

the level currently in use. To record, press and

release the Record button (on the back); a Level

LED (green) and the Record LED (red) will light.

While both LEDs are lit, press and release the

message key to be recorded on; the Record LED

blinks to indicate the device is recording. Speak

clearly while recording, then press any key to

stop recording. Continue to record additional

messages or exit Record mode. To exit Record

mode, press and release the Record button: both

LEDs turn off. A Record Lock feature is available

to prevent unwanted recording or erasing of

messages. To lock the recording ability, see

Lock Options for details. Also, see Tips and

FAQs for recording tips.

Play Messages

Press and release a message button; a green

level LED will blink while the recording plays.