- ページ 3

タッチターミナル DT Research DT317BTのPDF 基本操作マニュアルをオンラインで閲覧またはダウンロードできます。DT Research DT317BT 4 ページ。 Mobile pos tablet
DT Research DT317BT にも：基本操作マニュアル (12 ページ)

ページを印刷する

DT317BT

OPERATION

Powering ON and OFF

To activate the DT317BT, push and quickly release the Power Button. The display will

come on in a few seconds. To put the DT317BT in Standby mode, push and quickly

release the Power Button. To turn the DT317BT oﬀ for extended storage, power oﬀ

safely using any software function that "shuts down computer" provided in the software

operating system.

NOTE:

The battery packs shipped with your tablet may be low in power—please use the

AC-DC adapter with the DT317BT when setting up for the ﬁrst time to fully charge

the internal battery pack. You may charge the external battery pack with it attached

to the DT317BT, or with the optional external battery charger kit.

NOTE:

When the battery pack is charging, the blue-colored Battery LED should

blink slowly. If plugging in the AC-DC adapter does not trigger this blinking

activity and the LED stays dark, the battery pack(s) may have been drained

substantially. Try unplugging/ replugging the AC-DC adapter to the DT317BT a

few times to activate the charging process.

NOTE:

To conserve power, use (push and quick release) the Power Button to put the

tablet in "Standby" mode while not in use. Pushing brieﬂy on the same button

will wake up the system within seconds.

NOTE:

Avoid using the Power Button ("hold 4+ seconds" feature) to turn oﬀ the

tablet—this form of hardware shutdown is intended to be a means of recovery

from lockups, and not as normal operation.

ENGLISH

Start Up

If the power up (from Standby mode or otherwise) is successful, the appropriate

interface will be displayed after a launch sequence of several seconds. The wireless LAN

connection may take 10-15 seconds to be established.

Conﬁguring the Mobile Tablet

The DT317BT may be conﬁgured using the utilities and methods dictated by the

software operating system. The DT317BT should be conﬁgurable for various properties

such as user proﬁles, network features, and several system elements.

Wireless Networking

Wireless LAN

The DT317BT is often delivered with an embedded (user-inaccessible) 802.11a/b/g/n

WLAN adapter equipped with a hidden custom antenna.

•

Through the support of typical WLAN adapters, the DT317BT should be able to

detect all 802.11 access points in the vicinity for you to select the access point of

your choice for connection.

•

The SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT317BT and the

access points have to match. The SSID is case-sensitive and it is recommended

that you enable WEP/WPA/WPA2 encryption (or advanced alternatives) for secure

access.

•

When WEP/WPA/WPA2 is enabled, you may need to consult your network admin-

istrator or your networking equipment literature to properly conﬁgure associated

settings such as Authentication mode, etc.

•

Refer to the access point operating manuals for setting up the 802.11 access points

ENGLISH