- ページ 4

リモコン AIRTRONICS SD-10G AeroのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。AIRTRONICS SD-10G Aero 5 ページ。 2.4ghz fhss-3 radio control system
AIRTRONICS SD-10G Aero にも：クイック・セットアップ・マニュアル (8 ページ), マニュアル (16 ページ)

ページを印刷する

Use the Navigation Pad to select MIXING. Press the ENTER key.

Select FLAPERON –Press ENTER key. Flight Mode 4 Switch (#22) is still ON.

Use the YES/+ key and NO/- Keys to make the Flaperon Mix read as follow

Scroll down to FL>EL --Press ENTER key.

Use the YES/+ key and NO/- keys to make Flap to Elevator Compensation Mix read as follows:

Select SURFACE using the Navigation Pad. Press ENTER.

Press the Navigation Pad Down arrow and select EPA. Scroll to the right and select LF.

Use the Yes/+ key to input a value of 100%. Do the same for the RF

The screen will show 2 100% indicating FLAP 2 is used for this function. Note that polarity determines

the direction of the Flap servo throw and value the amount....Press the END key twice.

Note: Turn OFF each Flight Mode switch after completion of each of the Flight Mode mixes. The above

figures are trial values. Fine tune later. The value determines the amount of servo travel and the polarity

determines the direction of servo travel.

- 4 -

F-MODE (4)

COMMON >SEP

ACT/INH > ACT

FL >LA 100%

FL >RA 100%

Press END key.

F-MODE (4)

COMMON > SEP

FL > EL > + or – 10% Press END key three times.

Jack R. Albrecht

Airtronics Technical Support

17 June 2009