- ページ 3

おもちゃ AIRTRONICS Aero Fixed Wing SD-10GのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。AIRTRONICS Aero Fixed Wing SD-10G 8 ページ。 Aero fixed win

section 1: UsinG tHe tYPe MenU, continUed....

Choose the Desired Wing Type Option

Two Wing Type options are available - either NORMAL or DELTA. Choose the option illustrated below that best matches your

aircraft's wing type.

WING>NORMAL may or may not

include ailerons and/or flaps.

If your aircraft features "Elevons", choose WING>DELTA. If your aircraft is a flying wing and does not feature separate ailerons

and elevators, choose WING>DELTA. If your flying wing features separate ailerons and elevators (not common), choose

WING>NORMAL.

When WING>DELTA is chosen, the elevator and aileron channels are mixed together to provide pitch and roll control.

Choose the desired Aileron Type Option - Normal Wing Type Only

Two Aileron Type options are available - either 1 or 2. Choose the option illustrated below that best matches how the aileron

servos control your aircraft's ailerons. Choose 1 if both ailerons are controlled by a single servo and choose 2 if each aileron

is controlled by its own individual servo.

This option can only be changed if you chose the WING>NORMAL option previously. If WING>DELTA is chosen, this option

cannot be changed because WING>DELTA always uses aileron and elevator mixed together to provide both pitch and roll.

1 Aileron Servo Controls Both Ailerons

*If you're using 1 servo to control each aileron, but you use a Y-Harness to join the two servos together, choose the AILERON>1

option. In addition, some large models use two servos on each aileron. This is different from choosing AILERON>2 as illustrated

above. If your model features two servos per aileron, each pair of aileron servos should be Y-Harnessed together, then

AILERON>2 chosen. The SD-10G does not support more than 2 aileron channels in AERO mode.

Choose the desired Flap Type Option

Two Flap Type options are available - either 1 or 2. Choose the option illustrated below that best matches how the flap

servos control your aircraft's flaps. Choose 1 if your flaps (whether solid or split) are controlled by a single servo and choose

2 if each flap is controlled by its own individual servo.

FLAP>1

1 Flap Servo Controls 1 Flap

*If you're using 1 servo to control each flap, but you use a Y-Harness to join the two servos together, choose the FLAP>1 option.

WING>NORMAL

If your model does not feature any ailerons, choose AILERON>1.

AILERON>1

1 Flap Servo Controls Split Flaps

WING>DELTA may or

may not include flaps.

1 Aileron Servo Controls Each Aileron*

If your model does not feature any flaps, choose FLAP>1.

FLAP>1

Website: www.airtronics.net

WING>DELTA

AILERON>2

FLAP>2

1 Flap Servo Controls Each Flap*

| Phone: (714) 963-0329