- ページ 4

おもちゃ AIRTRONICS Aero Fixed Wing SD-10GのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。AIRTRONICS Aero Fixed Wing SD-10G 8 ページ。 Aero fixed win

section 1: UsinG tHe tYPe MenU, continUed....

Choose the desired Tail Type Option

Three Tail Type options are available - either Normal, V-Tail or 2xEL. Choose the option illustrated below that best matches

your aircraft's tail type. Choose Normal if your aircraft features a horizontal and vertical stabilizer and the elevator (whether

solid or split) is controlled by one servo. Choose V-Tail if your aircraft features a V-Tail and choose 2xEL if your aircraft features

a horizontal and vertical stabilizer and each elevator is controlled by its own individual servo.

This option can only be changed if you chose the WING>NORMAL option previously. If WING>DELTA is chosen, this option

cannot be changed.

TAIL>NORMAL

Horizontal and Vertical Stabilizer.

1 Servo Controls Solid Elevator

When V-Tail is chosen, the elevator and rudder channels are mixed together to

provide pitch and yaw control.

Choose the desired Throttle Type Option

Two Throttle Type options are available - either 1 or 2. Choose the option that best matches your aircraft's number of engines

or electric motors. Choose 1 if your aircraft features 1 engine or 1 electric motor. Choose 2 if your aircraft features 2 or more

engines or 2 or more electric motors.

Aircraft Features 1 Engine or 1 Motor

If your model features four engines or four electric motors, throttle control for both outer engines or motors should be Y-Harnessed

together and throttle control for both Inner engines or motors should be Y-Harnessed together, then THROTTLE>2 chosen. The

SD-10G does not support more than 2 throttle channels in AERO mode.

4) After making your Model Type selection choices, press the ENTER key.

The selection options will be displayed for verification. For example,

2A1F1E1R1T (2 Aileron servos, 1 Flap servo, 1 Elevator servo, 1 Rudder

servo, and 1 Throttle servo).

5) After verifying that the selection options are correct, press the YES/+ key to

Create New Data. After ~10 seconds, the new programming data will be

loaded into the transmitter as indicated by the progress bar.

Horizontal and Vertical Stabilizer.

1 Servo Controls Split Elevator

THROTTLE>1

Website: www.airtronics.net

TAIL>NORMAL

THROTTLE>2

Aircraft Features 2 or More Engines or Motors

| Phone: (714) 963-0329

TAIL>2xEL

Horizontal and Vertical Stabilizer.

1 Servo Controls Each Elevator Half

TAIL>V-TAIL

1 Servo Controls Elevator and 1

Servo Controls Rudder