- ページ 4
コードレス電話 Conairphone CID200のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Conairphone CID200 7 ページ。 Caller id speakerphone with 10 memory dialing
ページを印刷するSETTING UP YOUR CID200
DO NOT CONNECT the line cord to the wall outlet until the
Caller ID setup has been completed.
To Set the Language
The LCD shows 'ENTER LANGUAGE' followed by a choice of 3
languages (English, Spanish, French). If your display does not
appear this way, press and hold both [ ] and [ ] for 4 seconds.
1. The LCD then shows 'ENG ESP
FRA'.
2. The 'ENG' is BLINKING. Press [ ]
or [ ] to select 'ENG', 'ESP', or
'FRA'.
3. Press [ERASE] to confirm.
To Set the LCD Contrast
1. If ENG is selected, the LCD shows
'LCD CONTRAST'.
2. Press [ ] or [ ] to adjust five levels
(from 1 to 5, default is 3) contrast
of LCD.
3. Press [ERASE] to confirm.
To Set the Area Code
1. The LCD shows 'ENTER AREA
CODE'. The first digit '–' of the area
code will blink.
2. Press [ ] or [ ] to enter the area
code.
3. Press [ERASE] to confirm and go to next entry.
4. Repeat steps 2 and 3 until 3-digit area code is set.
To Set the Date and Time
1. The LCD shows 'ENTER TIME
DATE'.
2. Press [ ] or [ ] to select the hour
digits.
3. Press [ERASE] to confirm and go to the next entry.
4. Press [ ] or [ ] to select the minute digits.
5. Press [ERASE] to confirm and go to the next entry.
6. Press [ ] or [ ] to select the month digits.
7. Press [ERASE] to confirm and go to the next entry.
7
8. Press [ ] or [ ] to select the date digits.
9. Press [ERASE] to confirm.
10. The LCD shows 'TOTAL:00
NEW:00', which means both the
total call and new call counter are
zero.
LCD Contrast Control
To adjust the contrast of the LCD, press and release the
[CONTRAST] to make the LCD darker (from lighter) or lighter
(from darker) depending upon the room's lighting conditions.
TELEPHONE FEATURES
Tone/Pulse Switch
Set switch to your type of service. If you don't know whether you
have tone or pulse:
1. Put the switch on "TONE".
2. When you have a dial tone, press any key on the keypad. If
the dial tone stops, leave it on "TONE". If not, change the
setting to "PULSE".
Receiver Volume Control
The receiver volume control is located on the side of the handset
of your phone. This enables you to adjust the receiver volume
from NORM to HI for a better listening level.
Ringer Off/Low/High
Your CID200 features a harmonic dual tone ringer that can be
adjusted from a loud (HI) to a soft (LO) sound level. When you
don't want to be disturbed, slide the switch to the OFF position.
You can still make outgoing calls without being disturbed by
incoming calls.
Pause
Whether you have Tone or Pulse service, you can insert a 4-
second PAUSE into the dialing or storing of a number into
memory in order to access custom and telebanking services,
long distance, etc. Press [PAUSE] at the desired point in the
number. Press [PAUSE] again if an additional 4 seconds is
needed.
8
Redial Button
Automatically redials last number called (up to 32 digits). If the
number was busy or unanswered:
a. Hang up the HANDSET on the base (or depress the hook
switch).
b. Lift the HANDSET (or release the hook switch).
c. Press [REDIAL].
Flash
The FLASH button can be used to obtain a new dial tone after
ending a call. The FLASH button is also a useful feature for
special telephone services such as Call Waiting and Three-Way
Calling.
Note: These special telephone services must be subscribed to
separately from your local phone company.
Data Port
The CID200 is equipped with a second jack that allows you to
connect a communication device, such as a computer modem,
answering machine, or fax machine to a telephone line. To use
this feature, connect a line cord (not included) from the
communication device to the second (DATA PORT) jack on the
back of the base.
NOTE: Because a computer modem and a fax machine transmit
through the telephone line, you will not be able to use your
telephone while these devices are connected to the DATA PORT
jack and in use. Once you are done using the modem or fax
machine, the telephone line will be available and the telephone
can be used.
Caller Timer
The CID200 is designed with a clock timer to count the off-hook
time in seconds, up to one hour. The LCD timer display will
appear when the handset is lifted off the base or [SPEAKER] is
pressed.
9