- ページ 5

コードレス電話 Conairphone CID200のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Conairphone CID200 7 ページ。 Caller id speakerphone with 10 memory dialing

ページを印刷する

TELEPHONE OPERATION

NOTE: Batteries must be installed, or Telephone operations will

not work properly (see Installation).

Receiving a Call

Handset

1. When your phone rings, pick up the handset and use it like

any basic telephone.

2. Hang up the handset to release the telephone line when your

conversation is completed.

Speakerphone

1. When your phone rings, press [SPEAKER] (the green LED

indicator light will come on).

2. Using the volume control, adjust the volume to the desired

sound level.

3. Press [SPEAKER] to end your conversation and release the

telephone line (indicator light will turn off).

Dialing a Call

Handset

1. Pick up the phone and wait for a dial tone.

2. Press the keypad for the telephone number you wish to dial.

Speakerphone

1. Press [SPEAKER] and wait for a dial tone.

2. Press the keypad for the telephone number your wish to dial.

3. When the party you are calling answers, you will hear them

through the speaker. Adjust the volume to the desired level.

4. When you have completed your call, press the [SPEAKER]

to release the telephone line.

Tone/Pulse Combination Dialing

Combination dialing is useful to subscribers of Pulse (rotary)

service who wish to gain access to various low-cost long-

distance or automated computer services otherwise not available

to them.

1. With the TONE/PULSE switch in the PULSE position, dial

the phone number.

2. Press [

], and your telephone will change to TONE dialing

mode.

3. Dial your code/authorization number. When your call is

completed, your telephone will automatically return to the

PULSE dialing mode.

NOTE: Combination dialing can also be stored into the memory

for one-touch access to your long distance or automated

computer service.

BASIC MEMORY PROGRAMMING

The CID200 comes with 10-memory dialing.

NOTE: Your local phone company restricts the time you can

have the handset off the base (off-hook).

YOU SHOULD PROGRAM THE CID200 MEMORY WITH THE

LINE CORD UNPLUGGED FROM THE WALL, IF YOU ARE

GOING TO PROGRAM MORE THAN ONE PHONE NUMBER.

Press [STORE] to enter memory store.

Press the keypad to enter the number that you want to program.

Press [STORE]. The 'MEM' will be displayed on the right corner

of LCD.

Press the memory location (0 to 9) on the keypad. The LCD will

then return to the 'Answer-Ready' mode, and display the total

call counter, new call counter, current time and date.

Copy from the Caller ID to Telephone Memory

Press [ ] or [ ] until the Caller ID memory location to be copied

appears on the LCD. Press [STORE] twice to enter memory

store. The 'MEM' will be displayed on the right corner.

Press the memory location (0 to 9) on the keypad. The LCD will

then return to the 'Answer-Ready' mode, and display the total

call counter, new call counter, current time and date.

If no key is pressed within 20 seconds, the LCD will return to

'Answer-Ready' mode.

Repeat the above steps to store a different number in the same

speed dial location, or to store a new number in a different speed

dial location.

NOTES:

• Pressing [PAUSE] will place a 4-second PAUSE into the

number. Which may be required for accessing special phone

services.

• You can store a number with up to 16 digits maximum. Only

the last 14 digits will be displayed.

MEMORY DIALING

1. Pick up the handset to make your call.

2. Press [MEMORY] [0] ... [MEMORY] [9] for one of the 10

memory locations to be dialed.

NOTE: Remember to plug the telephone line cord back into the

wall.

CALLER ID OPERATION

NOTE: Batteries are required for Caller ID operation.

Received Call

If only the caller's phone number is

received, the LCD shows the caller's

phone number with the time and date

it was received. The 'NEW' icon turns

on and New Call LED blinks.

Caller ID (Transmission) Error

If an incorrect, invalid or incomplete

Caller ID signal is received, the LCD

shows '-LINE ERROR-'.

Caller ID Private Call (Blocked)

If the name and number are not

available due to the caller's restriction,

the LCD shows '-PRIVATE CALL-'

with the time and date received. The 'NEW' icon turns on and

New Call LED blinks.

Caller ID Out of Area (Data Not Available)

If the name and number are not

available, the LCD will show '-

UNAVAILABLE-' with the call's time

and date. The 'NEW' icon turns on

and New Call LED blinks.