- ページ 7
録音機器 DAN NTP TECHNOLOGY DAD THUNDER CORE AX CenterのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。DAN NTP TECHNOLOGY DAD THUNDER CORE AX Center 19 ページ。 Thunderbolt 3, dante, madi and adat modular analogue & digital audio interface
ページを印刷するInstallation Guide AX Center
The DADman remote control program installation
1.
Install the DADman program by downloading the application from the DAD support website:
www.digitalaudiosupport.com. Follow the instructions of the install program. Please note that there are
two different program downloads; One for Windows and one for MacOS.
2.
Create a shortcut for the DADman program on the desktop.
3.
Double-click on the DADman icon and launch the DADman application.
Connect your AX Center to DADman
AX Center can be controlled via Thunderbolt or Ethernet. At the first start-up, the the DADman window may be
blank as no units are yet connected. In the top menu bar, select Tools/Device List and the window will show a list
of the discovered units. If the unit is connected via Thunderbolt this will appear in the list. If there is no
Thunderbolt connection, the units can be connected via Ethernet. If a unit on the Ethernet does not appear in
the list, apply 'Refresh' when using a Windows PC in order to discover the AX Center over Ethernet. On MacOS,
'Action' is used to select 'Refresh IP list' The Device List window is shown in figure 1. A unit will always be
discovered but depending on your network configuration it will have to be set to DHCP or Manual IP addressing.
In order to attach the unit to DADman the connect box has to be checked.
Note. If the DAD Thunder|Core Thunderbolt driver is installed on the computer where DADman is
running, the software will automatically connect via Thunderbold to AX Center and not via Ethernet.
Assigning the IP address for the computer and the AX Center
When the DADman program is installed, you are able to finalise the network configuration of AX Center. You
have the option of using fixed IP addresses or IP addresses assigned via DHCP. DHCP can be auto assigned via the
Ethernet by itself or via an external DHCP server providing IP address for all units on your network.
Doc no. AXCNTR-8001-A-4
Figure 2, DADman Device list
Rev. date 221023
Page 7 of 19