- ページ 10

録音機器 DAN NTP TECHNOLOGY DAD THUNDER CORE AX64のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。DAN NTP TECHNOLOGY DAD THUNDER CORE AX64 19 ページ。 Thunderbolt 3, dante, madi and adat modular audio interface

ページを印刷する

Installation of DAD Thunderbolt 3 driver on Windows PC

The driver software has to be installed completely before it can work properly.

When you install the driver, it is of no importance if you have units or other peripherical devices

connected to the Thunderbolt 3 / USB-C port on the computer. In the process descried below there are

no devices connected before installation.

The installation sequence is the following:

1. Copy the driver .msi windows installer file to the computer desk top and double click in order

to start installation

2. Follow the installation instructions click Next and then Install.

3. Once the driver is installed open your audio application and chose the Digital Audio Denmark

ASIO driver

4. In order to configure the ASIO driver open the ASIO dialogue window in the audio

configuration section of your audio application

5. Configuration can be done on the parameters shown in figure 6

Note. The DAD ASIO control panel is accessible as a stand-alone configuration window or if your DAW

audio application supports this, from inside the audio configuration dialogue.

Doc no. AX64-8001-A-4

Figure 5, ASIO driver configuration window.

Rev. date 221023

Page 10 of 19